I tried simplifying the problem statement, it appears to be counter productive. So here is the full story. I have a server (A) behind NAT, in a country that blocks a lot of websites and performs DPI.

I have a non-standard network setup. I normally set up a device for DHCP/DNS/VPN. I use several networks (I live in two flats, and I have a dedicated host running in a datacenter that hosts several ...

How to statically address a Windows 2008 / Windows 2008 R2 Server How to statically address a Windows 7 Client System How to setup DNS for IPv6 on a Windows 2008 R2 ...

Like it or lump it, you're going to need to add IPv6 to your network. Here's how to start. Some people still think they don’t need to worry about the growing shortage of Internet IPv4 addresses and ...

Network World is publishing this report in its entirety as a community service. The University of New Hampshire InterOperability Laboratory (UNH-IOL) hosted its third IPv6 Customer Edge (CE) Router ...

When it comes to IPv6 support, consumer home networking gear lags far behind other devices, like enterprise equipment and PC operating systems. Most devices certified as IPv6-compliant by the IPv6 ...

Rate your favorite Cisco Press books. Years of innovation and work to continuously improve various transport technologies and network elements led operators to have high expectations of their networks ...

Over the past couple of years, at least three Japanese vendors have launched routers with special hardware aimed at delivering high performance when handling IPv6 traffic. They are: BII tested ...

Stateless address autoconfiguration, or SLAAC, is the mandatory and most common mechanism used to automatically configure IPv6 networks. In some network IPv6 renumbering scenarios, however, hosts ...

Neighbor Discovery Protocol IPv6 Neighbor Discovery (ND) was first designed and published almost 10 years ago, as RFC 1970. It has been revised since then as RFC 2461, and a new version, focusing on ...